基于Box-Behnken设计-响应面法的黄萸肾舒颗粒闪式提取工艺研究

Flash extraction process of Huangyu Shenshu Granules based on Box-Behnken design-response surface methodology

  • 摘要:
    目的 基于Box-Behnken设计-响应面法优化黄萸肾舒颗粒的闪式提取工艺。
    方法 以莫诺苷和马钱苷的提取量及干膏得率作为考察指标,选取转速、液固比和提取时间作为考察因素。在前期试验基础上,结合Box-Behnken设计-响应面法,对黄萸肾舒颗粒的闪式提取工艺进行研究和优化。
    结果 黄萸肾舒颗粒闪式提取的最佳工艺条件是以水作为提取溶剂,转速4 560 r/min, 液固比23 mL/g, 提取时间85 s。
    结论 基于Box-Behnken设计-响应面法建立的闪式提取工艺具有快速、高效的特点,适用于黄萸肾舒颗粒的后续产业化开发。

     

    Abstract:
    Objective To optimize the flash extraction process of Huangyu Shenshu Granules based on Box-Behnken design-response surface methodology.
    Methods The extraction yields of morroniside and loganin, as well as the yield of dry extract, were used as evaluation indices. The rotation speed, liquid-solid ratio, and extraction time were selected as the investigation factors. Based on preliminary experiments, combined with Box-Behnken design-response surface methodology, the flash extraction process of Huangyu Shenshu Granules was studied and optimized.
    Results The optimal condition for the flash extraction of Huangyu Shenshu Granules were taking water as the extraction solvent, with a rotation speed of 4, 560 r/min, a liquid-solid ratio of 23 mL/g, and an extraction time of 85 s.
    Conclusion The flash extraction process established based on Box-Behnken design-response surface methodology is rapid and efficient, and suitable for the subsequent industrialization development of Huangyu Shenshu Granules.

     

/

返回文章
返回